Kopo
Lisebelisoa tsa ho cheka tsa Tricone esale li sebelisoa khafetsa indastering ea oli le khase, 'me li ntse li ntlafatsoa!
Re na le mefuta e mengata ea khetho ea li-tricone - ho na le hanyane bakeng sa ts'ebeliso e 'ngoe le e' ngoe.
Mohala oa rona oa sehlahisoa o ka hlophisoa ho sebelisa likotoana tsa tungsten car bide insert (TCI) le likotoana tsa meno a tšepe bakeng sa lits'ebetso tse thata ka ho fetisisa tsa ho cheka.
Li-tricone bits, tseo ba bang ba ka li bitsang li-roller cone bits kapa tri-cone bits, li na le li-cones tse tharo.Khoune e 'ngoe le e' ngoe e ka fetoloa ka bonngoe ha khoele ea ho phunya e potoloha 'mele oa karoloana.Li-cones li na le li-roller bearings tse kentsoeng ka nako ea kopano.Likotoana tsa ho itšeha li ka sebelisoa ho cheka libopeho leha e le life haeba ho khethoa sehahi se nepahetseng, se bere le molomo.
Likotoana tsa tricone tse ntlafalitsoeng le tse entsoeng ke JCDRILL li sebelisoa haholo-holo bakeng sa merafo e meholo e bulehileng ea mekoti, joalo ka merafo ea mashala a bulehileng, merafo ea tšepe, merafo ea koporo le merafo ea molybdenum, le merafo e seng ea tšepe, le ho cheka seliba sa metsi.Ka mefuta e mengata e ntseng e eketseha ea mefuta e fapaneng, e boetse e sebelisoa haholo ho chekoa metsi, ho hloekisa metheo, ho cheka ka hydrogeological, coring, tunneling lefapheng la lipalangoang tsa terene le ho cheka shaft merafong e ka tlas'a lefatše.
Tataiso ea Khetho ea Bit ea Tricone
IADC | WOB(KN/mm) | RPM(r/mots) | SEBELISANG LIPOTSO |
114/116/117 | 0.3~0,75 | 180-60 | Libopeho tse bonolo haholo tse nang le matla a tlase a khatello le ho phunya ho phahameng, joalo ka letsopa, lejoe la seretse, choko, jj. |
124/126/127 | 0.3~0,85 | 180-60 | Meetso e bonolo e nang le matla a tlase a hatellang le ho phunya ho phahameng, joalo ka seretse, gypsum, letsoai, lejoe la mokoetla le bonolo, jj. |
134/135/136/137 | 0.3~0,95 | 150-60 | Libopeho tse bonolo ho isa ho tse mahareng tse nang le matla a tlase a khatello le ho phunya ho phahameng, joalo ka shale e mahareng e bonolo, gypsum e thata, mokoetla o bonolo o mahareng, lehlabathe le bonolo le mahareng, sebopeho se bonolo se nang le li-interbed tse thata, jj. |
214/215/216/217 | 0.35~0,95 | 150-60 | Meetso e mahareng e nang le matla a phahameng a compress, joalo ka shale e mahareng e bonolo, gypsum e thata, lejoe la mokoetla le bonolo, lehlabathe le bonolo le mahareng, sebopeho se bonolo se nang le li-interbed tse thata, jj. |
227 | 0.35~0,95 | 150 ~ 50 | Meetso e thata e mahareng e nang le matla a phahameng a khatello, joalo ka shale ea abrasive, limestone, sandstone, dolomite, hard gypsum, marble, joalo-joalo. |
Tlhokomeliso: Meeli e ka holimo ea WOB le RPM tafoleng e ka holimo ha ea lokela ho sebelisoa ka nako e le 'ngoe. |
Boholo ba Bits
Bit Size | API REG PIN | Torque | Boima ba 'mele | |
Intshi | mm | Intshi | KN.M | Kgs |
3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
3 1/2 | 88.9 | 4.2-6.2 | ||
3 7/8 | 98.4 | 4.8-6.8 | ||
4 1/4 | 108 | 5.0-7.5 | ||
4 1/2 | 114.3 | 5.4-8.0 | ||
4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
4 3/4 | 120.7 | 7.5-8.0 | ||
5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
5 1/4 | 133.4 | 10.7-12.0 | ||
5 5/8 | 142.9 | 12.6-13.5 | ||
5 7/8 | 149.2 | 13.2-13.5 | ||
6 | 152.4 | 13.6-14,5 | ||
6 1/8 | 155.6 | 14.0-15.0 | ||
6 1/4 | 158.8 | 14.4-18.0 | ||
6 1/2 | 165.1 | 14.5-20.0 | ||
6 3/4 | 171.5 | 20.0-22.0 | ||
7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
7 5/8 | 193.7 | 32.3-34.0 | ||
7 7/8 | 200 | 33.2-35.0 | ||
8 3/8 | 212.7 | 38.5-41,5 | ||
8 1/2 | 215.9 | 39.0-42.0 | ||
8 5/8 | 219.1 | 40.5-42,5 | ||
8 3/4 | 222.3 | 40.8-43.0 | ||
9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
9 5/8 | 244.5 | 61.8-65.0 | ||
9 7/8 | 250.8 | 62.0-67.0 | ||
10 | 254 | 68.0-75.0 | ||
10 1/2 | 266.7 | 72.0-80.0 | ||
10 5/8 | 269.9 | 72.0-80.0 | ||
11 1/2 | 292.1 | 79.0-90.0 | ||
11 5/8 | 295.3 | 79.0-90.0 | ||
12 1/4 | 311.2 | 95.0-102. | ||
12 3/8 | 314.3 | 95.0-102.2 | ||
12 1/2 | 317.5 | 96.0-103.0 | ||
13 1/2 | 342.9 | 105.0-134.0 | ||
13 5/8 | 346.1 | 108.0-137.0 | ||
14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
15 | 381 | 145.0-165.0 | ||
15 1/2 | 393.7 | 160.0-180.0 | ||
16 | 406.4 | 200.0-220.0 | ||
17 1/2 | 444.5 | 260.0-280.0 | ||
26 | 660.4 | 725.0-780.0 |
TCI TRICONE LITS'OA PAKE
Bonyane Bongata ba Order | N/A |
Theko | |
Lintlha tsa Sephutheloana | Sephutheloana sa Tlhahiso e Tloaelehileng ea Export |
Nako ea thomello | 7 matsatsi |
Melao ea Tefo | T/T |
Matla a Phepelo | E ipapisitse le Taelo e Felletseng |