| Mmala | botsho, Bosehla | Lebitso la sehlahisoa | anchor bolt |
| Qetella | E khanyang(e sa koahetsoeng) | Tšebeliso | Ho tsitsisa ha letsoapo, qubu e nyenyane, sepekere sa mobu, ankora ea majoe |
| Mokhoa oa ho lekanya | Metric | Mantsoe a bohlokoa 1 | molamu oa ankora |
| Lebitso la Brand | JCDRILL | Mantsoe a bohlokoa 2 | molamu oa ankora oa ho cheka |
| Lintho tse bonahalang | Tšepe | Mantsoe a bohlokoa 3 | molamu oa ankora oa tšepe o nang le khoele e felletseng |
| Diameter | R25, R32, R38, R51, T30, T40, T52, T76, T103 | Lebitso 1 | lejoe la lefika |
| Bokhoni | Bokhoni ba Moroalo o Phahameng | Lebitso 2 | sekoti sa ankora |
| Standard | ISO | Lebitso 3 | lithupa tsa ankora |
Selelekela
Tlhaloso e qaqileng ea Sehlahisoa
| Lebitso: | R25N Ground Engineering Tool Self Drilling Anchor Hex Nut | Kopo: | Meepo ea Mashala, Tunneling, Slope Foundation le Motlakase oa Metsi |
| Kalafo ea Bokaholimo: | Hot Dig Galvanized | Boitsebiso: | C45/40Cr |
| Khoele: | R25N | Boholo ba Senotlolo: | 75 limilimithara |
| Bolelele: | 70-90 limilimithara | Mmala: | E Thehiloe ho Bareki |
| Leseli le Phahameng: | R25N Steel Hex Nuts, 70mm bolelele ba tšepe hex linate , R25N galvanized hex nuts | ||
R25N Ground Engineering Tool Self Drilling Anchor Hex Nut
The Self Drilling Anchor (SDA) sistimi ke tharollo ea bolting bakeng sa maemo a thata a fatše le mafika.Sistimi ena e thusa ho cheka le ho fafatsa ts'ebetso e le 'ngoe, ho boloka chelete e ngata sebakeng sa mosebetsi le nako ea projeke.E nang le sekoti sa ankora se nang le sekoti se nang le sekoti sa sehlabelo se etsang ho phunya, ho tsitlella le ho fafatsa ts'ebetso e le 'ngoe.Sistimi ea li-ankora ea ho cheka e sebelisoa haholo ho tsitsisa letsoapo, ts'ehetso ea pele ea tunneling, metheo e nang le li-micro piles joalo-joalo, e sebelisoang haholo mererong ea merafo, ea tunnel, ea seporo, kaho ea metro joalo-joalo.
Sebopeho:
1. Ho etsa kopo bakeng sa poleiti ea domed le poleiti e bataletseng.
2. Linate tsohle li feta matla a ho qetela a ho itšeha anchor bar.
3. E ka kopana le litlhoko tse thata mabapi le litlhaloso tsa ankora.
4. Li-galvanizing tse chesang tse chesang bakeng sa tšireletso ea kutu.
Anchor Nut
| Mohlala | R25N |
| Boholo ba Senotlolo (mm) | 41 |
| Bolelele (mm) | 41 |
| Ho thatafala (HRC) | 20-30 |
| Mofuta oa Khoele | R25 |
| Lisebelisoa tse so ntlafatsoe | C45/40Cr |
| Boima ba 'mele (kg) | 0.25 |
| Khoele | R25 |
| Khoele ea R-Khoele | ||||
 | Boholo | Dia e Ntle | Bolelele | Boima ba 'mele |
| mm | mm | Kg | ||
| R25N | 36 | 150 | 0.6 | |
| R32L | 42 | 145 | 0.8 | |
| R32N/1 | 42 | 160 | 0.85 | |
| R32N | ||||
| R32S/1 | 42 | 190 | 1.02 | |
| R32S | ||||
| R38 | 51 | 220 | 1.7 | |
| R51L | 63 | 140 | 1.2 | |
| R51L | 63 | 170 | 1.7 | |
| R5IN | 63 | 200 | 19 | |
| R5IN | 63 | 220 | 2 | |
Setšoantšo
| Bonyane Bongata ba Order | N/A |
| Theko | |
| Lintlha tsa Sephutheloana | Sephutheloana sa Tlhahiso e Tloaelehileng ea Export |
| Nako ea thomello | 7 matsatsi |
| Melao ea Tefo | T/T |
| Matla a Phepelo | E ipapisitse le Taelo e Felletseng |
